Keeping Your Battery Clean Makes Your Vehicle Safe



Did you ever really have to jump start your car only to discover that the battery was mired in crud? Had you been wondering what the glop was, it was battery corrosion, formed by acid condensation. Thankfully, to clear out the acid build-up, you just need to utilize a basic chemical solution. If you have baking soda at home, then you will be able to remove the battery acid. You'll want to take some precautions, but safe cleaning of your battery is only following a few instructions.

You will need to first obtain the supplies you need, most of which are in your home. The basic tools you will need are a pair of safety glasses to shield your eyes, adjustable pliers and a screwdriver with insulated handles, a stiff bristled brush, and the key component, baking soda. Some open-end and box wrenches, a plastic or metallic scraper, cleaning brushes for a battery terminal, and a turkey baster or small funnel. Some sponges or maybe clean cloths, a spray bottle with all-purpose household cleaner, some rubber gloves and a large bucket of clean water. This might seem like lots of things for cleaning a battery, but we did mention doing it safely.

As the corrosive deposits contain sulfuric acid, it is best to use rubber gloves and the safety glasses. Be mindful never to get the deposits on the car since it will damage the car's paint job. Exactly how much you check my reference need to clean the battery is determined by how much corrosion it has. If you'd like the battery to become very clean, you will have to remove the battery from the vehicle. The first step is to try using the scraper to remove as much dirt as possible and use the bristle brush to get at more.

The next phase would be to make a mixture of one tablespoon of baking soda to a pint of water, and take the turkey baster, and carefully apply the solution to the outside of the battery, along with the cable connections. You can then use the bristle brush so that you can loosen and remove the debris from the battery and you want to remove the cables so that cleaning will be easier. When disconnecting the battery pack, be sure to use the pliers or wrenches to loosen the connection and take them off with negative first then positive. For other elements of the battery, use the brush to remove the deposits then rinse with the baking soda solution.

You can use the squirt cleaner and sponge to remove any additional dirt and grease. After that, dry off all the pieces with a clean cloth and reassemble everything plus be sure that the cable is connected positive first. Double check things are secure and you then have a clean, safe battery.

Leave a Reply

Your email address will not be published. Required fields are marked *